What is the best way to remove the oxidized spots on the faucet?

When you install the faucet and use it for a period of time, you will find that the surface of the faucet is prone to water stains. After the water stains dry, very ugly oxidation spots will form. If it is not cleaned for a period of time, even if the faucet is high-end, it will become Faucet is eclipsed, so we must often clean and maintain the faucet.

1. How to get rid of oxidation spots on the faucet

Faucet cleaning is actually not complicated, as long as it is maintained regularly, it can keep the faucet looking like new for a long time.

Don't be disfigured by stains Tips for cleaning and maintenance of faucets

1. If it is a copper faucet, if you want to clean the electroplated surface, you can use boiling water and detergent to scrub it, or you can directly use some strong degreasing and decontaminating detergents for cleaning.

2. For scale, rust, etc. on the faucet, just wipe the surface with a damp cloth or sponge dipped in a little special detergent, then dry it with a clean rag or rinse it with water.

3. Use a soft-bristled toothbrush dipped in toothpaste or wipe gently with a scouring pad dipped in toothpaste to remove scale and oil stains and make the surface of the faucet clean and bright.

4. Many people only pay attention to the surface of the faucet when cleaning the faucet, but in fact the inside of the faucet is more important. If the water output from the faucet is reduced or the water is forked, it may be caused by a clogged bubbler. You can remove the bubbler, soak it in vinegar, clean the sundries with a small brush or other tools, and then reinstall it.

2. Precautions for cleaning the faucet

Although the chrome plating of the faucet claims to be corrosion-resistant and rust-free, improper cleaning methods will still cause abnormal wear and tear on the faucet.

Don't be disfigured by stains Tips for cleaning and maintenance of faucets

1. Do not wipe the surface of the faucet with hard objects such as steel wool, because the steel wool is very hard and it is easy to scratch the surface of the faucet.

2. It is best to use a neutral detergent for cleaning, and a strong acid-base detergent is not suitable for cleaning with a tap.

3. After the faucet is cleaned, the remaining water on the surface should be wiped dry with a dry lint-free towel to avoid residual water stains.

Three, faucet use and maintenance skills

1. Do not use too much force to switch the faucet, just turn it gently. Even if it is a traditional faucet, it doesn't take a lot of force to screw it down. In particular, do not support or use the handle as an armrest.

2. The metal hose of the shower head of the bathtub faucet should be kept in a natural stretch state, and it should not be coiled on the faucet when not in use. At the same time, when in use or not in use, be careful not to form a dead angle at the joint between the hose and the valve body, so as not to break or damage the hose.

3. When the water pressure is not lower than 0.02mpa (that is, 0.2kgf/cm2), after using for a period of time, if you find that the water output decreases, or even the water heater turns off, you can lighten it at the water outlet of the faucet. Gently unscrew the screen cover, remove impurities, and generally restore it to its original state.